Saturday, November 21, 2026Sat, Nov 21

Moon: waxing gibbous, 91% litAurora: quiet

Español

Space, Earth and the natural world, explained.

Spent Coffee Grounds Yield Cleaner Biodiesel Oil in Simple Lab Method

Chemists in Spain pulled oil from used coffee grounds at 45°C in 60 minutes with 0.3% impurities, leaving the grounds fit for other fuels.

A vibrant yellow coffee cup contrasts with the green grass, surrounded by fallen leaves.
Photo: elena_ sher / Pexels

Chemists at Universitat Rovira i Virgili (URV) in Spain have found lab conditions that pull oil out of used coffee grounds with only 0.3% impurities, against 3.9% for the standard laboratory method. The oil could go into biodiesel, and the process leaves the rest of the grounds in good shape for making other fuels and chemicals.

The results come from lab experiments and are published in the journal Biomass and Bioenergy (DOI: 10.1016/j.biombioe.2026.109467).

How much fat is left in spent coffee

The world produces roughly 10 million metric tons of coffee beans a year, according to the university, and only a small part of each bean ends up in the drink. Most of the rest is thrown out as solid waste. Spent grounds still hold about 15% lipids, the chemical name for fats and oils, and those fats can be processed into biodiesel.

Testing temperature, time and solvent

The team from URV’s Department of Chemical Engineering (Jorge F. Romero, Alberto Tampieri, Daniel Montané, Magdalena Constantí and Francesc Medina) used n-hexane, a solvent that industry commonly uses to separate fats from other material. In a planned series of experiments they changed three settings: the temperature, how long the extraction ran, and how much solvent went in per gram of grounds. They then checked how each setting affected the result alone and in combination.

The best balance came at 45°C for 60 minutes with 35 milliliters of hexane per gram of dry residue, Constantí said. Those settings recovered about 90% of the oil that Soxhlet extraction gets. Soxhlet is the lab standard for high yields, but it usually runs longer, uses more energy and is awkward to scale up for industry.

The fatty acid makeup of the oil barely changed from one test condition to the next. Linoleic and palmitic acids made up the largest shares, a mix that fits biodiesel production.

The researchers also tried ultrasound and microwaves to speed up recovery. Both helped in the early part of the extraction. Once purity, yield, energy use and the chance of scaling up were weighed together, though, a plain batch process with n-hexane at moderate temperature came out as the more balanced option.

What happens to the grounds after the oil is gone

The team wanted the leftover solid to stay useful. Coffee grounds contain cellulose, hemicellulose and lignin, the structural material of plants, which chemists call the lignocellulosic matrix. That material can be turned into bioethanol, lactic acid, polyhydroxyalkanoates, phenolic compounds and ingredients for sustainable aviation fuels.

Fat can block solvents and catalysts from reaching those components. The hexane step took out the oil without changing the underlying structure much, so the remaining residue should be easier to process further, according to the researchers. Medina said the study shows that removing the oil does not rule out other uses for the rest of the material.

What this means for biofuels

Biorefineries, plants that convert biological material into fuels, chemicals and other products, could use a method like this, according to the university, because it pairs good efficiency with practicality. The work also fits the idea of a circular economy, in which waste becomes raw material. That matters for sectors that are hard to electrify, such as heavy transport, where industries are looking for renewable fuels.

Montané described the aim as turning grounds into “various energy vectors and bio-based chemical products” while cutting the environmental impact of the waste piling up. The paper treats the hexane extraction as a pretreatment, the first step before oil becomes biodiesel or the residue becomes other products.

Source: ScienceDaily

Site editor: Nikita Sheikin